Share:
About CHNCIT JN-T700
| MODEL | UNIT | JN-T700 | ||
| TRAVEL | X Axis | mm (inch) | 700 | |
| Y Axis | mm (inch) | 400 | ||
| Z Axis | mm (inch) | 330 | ||
| Spindle Nose To Table | mm (inch) | 150-480 | ||
| Spindle Centre To Solid Column Surface | mm (inch) | 430 | ||
| TABLE | Working Area | mm(inch) | 800*400 | |
| Max.Loading | kg | 300 | ||
| T-Slots (No.*Width*Pitch) | mm (inch) | 3*14*125 | ||
| SPINDLE | Tool Shank | - | BT30 | |
| Speed | rpm | 12,000 (OPT15,000) | ||
| Transmission | - | Direct Drive | ||
| Bearing Lubrication | - | Grease | ||
| Cooling System | - | Oil Cooled | ||
| Spindle Motor Max.Rating | kw(HP) | 7.5 (10) | ||
| Axis Motor Max.Rating (MITSUBISHI) | kw | 1.5/1.5/3.0 | ||
| Axis Motor Max.Rating (FANUC) | kw | 1.8/1.8/2.5 | ||
| FEED RATES | Rapids On X/Y/Z Axis | m/min | 60/60/60 | |
| Max.Cutting Feedrate | m/min | 41255 | ||
| TOOL MAGAZINE | Tool Storage Capacity | pcs | 21 | |
| Type Of Tool (Optional) | type | BT30 | ||
| Max.Tool Diameter | mm(inch) | 60 (2.3) turret | ||
| Max.Tool Weight | kg | 3 | ||
| Max.Tool Length | mm(inch) | 250 (9.8) turret | ||
| AVG. CHANGING TIME (ARM) | Tool To Tool | sec | 0.35 (60HZ) | |
| Air Source Required | kg/cm2 | 6 up | ||
| ACCURACY | Positioning (VDI3341) | mm (inch) | 0.008 | |
| Repeatability | mm (inch) | 0.005 | ||
| DIMENSION | Machine Weight | kg | 5000 | |
| Power Source Required | KVA | 20 | ||
| Shipping Floor Plan (L*W*H) Water Tank And Chip Conveyor Not Included | mm (inch) | 1,961*2,500*2,500 | ||
| Floor Plan (L*W*H) | mm (inch) | 1,961*2,500*2,500 | ||
| •Specification is subject to change without further notice. | ||||
Inquiry - CNC DRILL & TAP MACHINE CHNCIT JN-T700
